Yangzhou Jiangqing Caster Manufacturing Co.,Ltd

LANGUAGE：

Chinese
新闻中心

Universal wheel overhaul method

Published:

2022-11-09 09:39

1、Check the visible wear of the tire surface. Tire surface "wear flat spot" can suggest the accumulation of foreign objects, such as wire and other debris may be wrapped around the wheel, take out the bolt and nut on the wheel, clean up the debris. Check whether the wheel bearing is broken, if the parts are not damaged can be reassembled and continue to use, if you often meet the wheel by the phenomenon of debris entanglement recommended that the assembly of anti-tangle cover to avoid.

2, the universal wheel caster loose or wheel jam can also cause the same "grinding point". Proper maintenance check, especially check the tightness of the bolt, how much lubricant, replace the broken caster can enhance the rolling performance and rotational flexibility of the equipment.

3、Seriously damaged or slackened rubber tires may lead to rolling instability, air leakage, abnormal load, and damage to the base plate, etc. Timely replacement of damaged tires and bearings can reduce the cost loss caused by downtime due to caster damage.

4. After checking and repairing the wheel, make sure the bolts and nuts are tightened, and use lock washers or lock nuts on all the bolts as much as possible. If the bolts are loose, tighten them immediately. If the wheel mounted inside the bracket is loose will cause the wheel to be damaged or unable to turn.

图片名称

Message

We will contact you within one working day. Please pay attention to your email.

submit